Pattern DFZ-OK

Pattern DFZ-OK

Pattern DFZ-OK

£320.00 GBP
£320.00 GBP
Skip to product information
Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • acoustic wall panel in oak - for high tones
  • acoustic wall panel in oak - for high tones
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • Pattern DFZ-OK
  • acoustic wall panel in oak - for high tones
  • acoustic wall panel in oak - for high tones
Pattern DFZ-OK
£320.00 GBP
£320.00 GBP

Per M²

Fluted Basketweave Wall Panel in Solid Oak

The DFZ-OK is a fluted basketweave wall panel in solid oak. The weave is made by light — bright and dark trading places as you move along the wall. Oak's even tone keeps the contrast soft, so the pattern reads through shadow and grain rather than colour.

Under raking light the weave is clearest — a fine architectural texture; under softer ambient light it settles into the wall and recedes. At scale the panel reads as a timber textile, suited to light-themed interiors where the lighter ground lets the pattern sit as part of the architecture: open-plan residences, hospitality interiors wanting warmth without drama, daylight-driven offices.

Pattern options

Two things to set at order — the size of the square, and the flute profile.

Square size. Standard 200 × 200 mm, customisable up to 500 mm. Smaller reads fine and busy; larger reads bold and architectural.

Flute profile. Three options: DFZ (base), DFZ-LP (low profile), DFZ-ACU (acoustic).

Bespoke variants and project commissions quoted on request.

 

Models and materials specifications
Base Model

Face material: solid oak (mixed species)
Finish: Hard wax oil (semi matt)
Base: 6.5 mm birch plywood (12 mm lightweight option available)
MR - Moisture Resistant

Finish: Base coat of Osmo Wood Protector, two top coats of semimat Osmo Hard Wax Oil (optional UV protection)

Base: 6 or 9mm marine (or birch) plywood, sealed with a PVA coat.

Glue: D4 PVA

Suited to: interior areas with frequent, short-term exposure to moisture and high humidity, such as kitchens and bathroom applications in zones 2 and 3
FR - Fire Retardant

Two finishing options.Thermoguard Fire Varnishwhere UV protection is required; theRubio Monocoat FR Oil Systemotherwise — oil is the preferred finish, retaining the natural feel and tonal depth of the timber that a varnish would seal over.

UV Finish: Thermoguard Fire Varnish (Euroclass B-s2,d0 · BS Class 0/1)
OIL Finish: Rubio Monocoat FR Oil System, Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1
Base: 7 mm (12 mm optional) lightweight poplar plywood, FR class B-s1,d0 to EN 13501
Glue: FR MS Polymer 

FR specification subject to confirmation per project — full data sheets, certificate of supply, and adhesive TDS available on request.
LEED - LEED upgrade

Both the moisture-resistant and fire-retardant variants can be specified to meet LEED requirements. The upgrade coversFSC-certified hardwood,no-added-formaldehyde plywood, andlow-VOC adhesives and finishes— supporting credits in Materials & Resources (responsible sourcing, EPD/HPD) and Indoor Environmental Quality (low-emitting materials).

Face material: FSC-certified American black walnut
Base material: FSC-certified, no-added-formaldehyde
Adhesive: low-VOC, SCAQMD Rule 1168 compliant
Finish: VOC Free Rubio Monocoat C2 Oil (UV-protected option available)
IMO - Marine specification

For installations on yachts and cruise ships, the IMO version, built with the materials tested at the standards required to support compliance with IMO 2010 FTP Code Part 5 (surface flammability). Test data and material declarations are supplied with the order. Final IMO / MED certification, class society approval, and flag-state acceptance are the buyer's responsibility — Artimatum is not a certifying body.

Test basis: IMO 2010 FTP Code Part 5 surface flammability
Optional test pack: FTP Code Part 2 smoke density and toxicity
Supplied with the order: materials test certificate, declaration and technical data sheets
Certification: issued by class society or notified body, instigated by the buyer (Artimatum supplies the test pack; the buyer obtains the certification
Suited for: interior bulkheads, and feature walls on yachts and cruise ships.

Final IMO / MED / class approval is obtained by the buyer through their nominated certifying body.

ELEMENTS

DFZ - Base model
  • Flat elements: random widths of 15 - 30 mm average thickness of 6mm ,
  • Fluted elements: 7 mm thick on average 8 to 12 mm tall.
  • Element density: 130 per square meter
  • Base: 6.5mm birch plywood
DFZ-ACU - acoustic model with tall flutes
  • Fluted elements: 7 mm thick on average 12 to 24 mm tall.
DFZ-LP - low profile flutes
  • Fluted elements: 12 mm thick on average, 8 to 11 mm tall.

Modules

Base module size: 200 x 200 mm (customisable size range 200 - 500 mm)

Specialist tiles

Flat tiles:
designed for installation in areas with outlets requiring flush mounting
Rebated tiles:
These tile have a small rebate to accommodate an edging strip for furniture panels or to create external corners. The actual size of the rebate varies depending on the specific use case.

customisation

We make things that work better and last longer. Our products solve real problems with clean design and honest materials.

Handmade in the Royal Town of Sutton Coldfield, England.

Related products