Pattern DFZ-W

Square meter

£360.00 GBP

Pattern DFZ-W

£360.00 GBP

Per M²

3D wall cladding with sound diffusing properties

SKU: DFZ-W20

This tiles are made from solid walnut strips of random widths and thicknesses. Bevelled, sanded and assembled on a 6mm birch plywood base. Finished with high quality hard wax oil. Use grab adhesive to glue to a wall or any other flat surface.

SPECIFICATIONS

This mosaics panels are made to measure and sold in square meters (m²).

Dimensions: 20 x 20 cm (7.9 x 7.9 inch)
Material: random strips of 4 - 25 mm thick solid walnut
Finish: Semi-matt hard wax oil
Base: 6mm birch plywood
25 tiles make one square meter

Depending on quantity purchased please allow 1 to 4 weeks for production and delivery.

Handmade in UK

Models and materials specifications

Face material: solid American black walnut
Finish: Hard wax oil (semi matt)
Base: 6.5 mm birch plywood (12 mm lightweight option available)

Finish: Base coat of Osmo Wood Protector, two top coats of semimat Osmo Hard Wax Oil (optional UV protection)

Base: 6 or 9mm marine (or birch) plywood, sealed with a PVA coat.

Glue: D4 PVA

Suited to: interior areas with frequent, short-term exposure to moisture and high humidity, such as kitchens and bathroom applications in zones 2 and 3

Two finishing options.Thermoguard Fire Varnishwhere UV protection is required; theRubio Monocoat FR Oil Systemotherwise — oil is the preferred finish, retaining the natural feel and tonal depth of the timber that a varnish would seal over.

UV Finish: Thermoguard Fire Varnish (Euroclass B-s2,d0 · BS Class 0/1)
OIL Finish: Rubio Monocoat FR Oil System, Bfl-s1 tested according to the standard EN 13501-1: EN ISO 11925-2 and EN ISO 9239-1
Base: 7 mm (12 mm optional) lightweight poplar plywood, FR class B-s1,d0 to EN 13501
Glue: FR MS Polymer

FR specification subject to confirmation per project — full data sheets, certificate of supply, and adhesive TDS available on request.

Both the moisture-resistant and fire-retardant variants can be specified to meet LEED requirements. The upgrade coversFSC-certified hardwood,no-added-formaldehyde plywood, andlow-VOC adhesives and finishes— supporting credits in Materials & Resources (responsible sourcing, EPD/HPD) and Indoor Environmental Quality (low-emitting materials).

Face material: FSC-certified American black walnut
Base material: FSC-certified, no-added-formaldehyde
Adhesive: low-VOC, SCAQMD Rule 1168 compliant
Finish: VOC Free Rubio Monocoat C2 Oil (UV-protected option available)

For installations on yachts and cruise ships, the IMO version, built with the materials tested at the standards required to support compliance with IMO 2010 FTP Code Part 5 (surface flammability). Test data and material declarations are supplied with the order. Final IMO / MED certification, class society approval, and flag-state acceptance are the buyer's responsibility — Artimatum is not a certifying body.

Test basis: IMO 2010 FTP Code Part 5 surface flammability
Optional test pack: FTP Code Part 2 smoke density and toxicity
Supplied with the order: materials test certificate, declaration and technical data sheets
Certification: issued by class society or notified body, instigated by the buyer (Artimatum supplies the test pack; the buyer obtains the certification
Suited for: interior bulkheads, and feature walls on yachts and cruise ships.

Final IMO / MED / class approval is obtained by the buyer through their nominated certifying body.